Oculus Quest 2 Won't Connect to PC [Fix] (2023)

Can't connect your Oculus Quest 2 to your Windows PC? Here is a complete guide to help you ifOculus Quest 2 won't connect to your Windows 11/10 PC.Oculus Quest 2 (rebranded asMeta-Quest 2) is an advanced all-in-one virtual reality (VR) system and headset developed by Facebook Reality Labs. With it, you can enjoy and play virtual reality games and have the best immersive experience. Now, many users have complained that they are unable to connect their Quest device to their PC. If you are one of these affected users, try the solutions we have mentioned in this post to resolve the issue.

Why won't my Oculus Quest 2 connect to my PC?

There could be various reasons why people are unable to connect the Oculus Quest 2 to their PCs. Here are some possible causes of this problem:

• If your PC does not meet the minimum requirements to support Quest 2 devices, then this issue occurs. So the first thing you need to do is make sure your PC meets the minimum requirements to handle the Oculus Quest 2.
• The problem may be due to the USB cable or port. So please check your USB port and cable and make sure all connections are correct and secure.
• In case your Oculus app is not updating then you are likely facing the issue at hand. So, if the scenario applies, update your Oculus app.
• The problem can also appear due to outdated device drivers, especially USB and graphics drivers. If the scenario applies, you can update your device drivers to the latest version and then try connecting Quest to your PC.
• If you just switched from Oculus Air Link (wireless) to Oculus Link (wired), you might be running into the issue in question. So please disable Airl Link in Quest settings to fix the problem.
• Your USB power saving settings may be the reason for the problem at hand. So disable USB power saving settings to fix the problem.
• If there are problems with your Quest device, such as corrupted B. data, the device may not connect to a PC. So, factory reset your Quest device to fix the problem.

Based on the above scenarios, you can try a suitable solution to fix the problem.

Why won't my Oculus Link connect to my PC?

And youOculus Link software not workingon your PC, the problem can be caused by outdated graphics, USB, and other system drivers. Even if your system is not up to date, you are likely facing the issue at hand. Other than that, this problem can also be caused by higher resolution, overlay feature enabled in the game, public test channel enabled in Oculus, or system file corruption.

It is used on Oculus Quest 2 (Meta Quest 2)to your Windows 11/10 PC, and then try the following suggestions:

1. Check your system specifications.
2. Check your USB cable/port.
3. Update the Oculus software.
4. Sign out and then sign back into your account.
5. Run a power cycle on your devices.
6. Update the device driver.
7. Deshabilitar AirLink.
8. Disable the USB power saving setting.
9. Factory reset your Quest device.

1] Check your system specifications

The first thing you need to do to fix the problem is to make sure that your PC meets the minimum requirements to handle the Oculus Quest 2 headset. If it doesn't, you'll need to upgrade your PC to use the Oculus Quest smoothly.

Minimum specifications for an Oculus Quest 2 compatible system:

• Operating system:windows 10
• Puerto:USB 3.0
• UPC:Intel Core i5-4590 o un AMD Ryzen 5 1500X
• Graphic chart:Nvidia GTX 970, 1060 3GB or better. Also all GTX 16 series graphics cards except the GTX 1650. All AMD RX 500, 600, 5000 and Vega series.
• Memory:8GB

If your PC meets the minimum requirements and you still can't connect the Oculus Quest to your PC, try the following possible solution to resolve the issue.

2] Check your USB cable/port

You need a good quality USB cable to connect Quest to your PC, especially the cable that supports data and power simultaneously. Therefore, make sure that you have connected the device to your PC using a suitable USB cable. Also, you need to make sure that the USB port you connected your device to is working properly. Try connecting the Quest to a different USB port and see if the device is properly connected or not. Also, make sure that all connections to the PC are correct and secure.

If there is no problem with your USB cable or port, continue to the next possible solution.

File: Fix Oculus Quest 2 microphone not working on Windows PC.

3] Update Oculus Software

This issue can occur if you are using an outdated version of the Oculus desktop app. Therefore, if the scenario applies, you should update your software to the latest version. To do this, simply visit the official website of the application and download the latest version. After that, run the installer and it will install the latest version of the app on your PC. Then try connecting the Quest 2 device to your PC again and check if the issue is resolved now or not.

If you're using the latest version of the Oculus Link software and you're still experiencing this issue, try the next possible solution.

4] Sign out and then sign back into your account

It is a workaround and it has worked for many affected users. You can try signing out of the Oculus software and then signing back into your account. If there is an error with your account or other temporary problem with the Quest software or device, it may be possible to fix it.

5] Power cycle your devices

Sometimes a simple reboot is all it takes to fix a problem. You can try the same in this case too. Just close the Oculus software and turn off your PC and Oculus Quest. Now unplug your devices from the main switch and wait for around a minute. After that, turn on your PC and Oculus Quest as usual. Then try connecting Quest to your PC and see if it connects or not.

6] Update device driver

Outdated and faulty device drivers can also cause this problem. You need an updated USB driver and an updated graphics driver for this device to function properly. So make sure that all your device drivers including graphics and USB drivers are up to date to avoid such issues on your PC.

There are multiple possibilitiesUpdate your device driverson Windows 11/10 PC. The most common and reliable method is to go to the official website of your device manufacturer and search for the latest drivers. Then download and install the drivers on your PC. Another easy method toUpdate your device drivers manuallyThis is done through Windows Settings, Device Manager, etc. in Windows 11/10. You can also use for freeThird Party Driver Update Softwareto automatically download and install your drivers.

After updating your device drivers, restart your PC and try connecting Quest to your PC and see if it works or not.

If your drivers have been updated and you are still facing the issue at hand, move on to the next possible solution to fix the problem.

Ver: Oculus software won't install on Windows 11.

7] Disable air link

If you just switched from a wireless Oculus Air Link to a wired Oculus Link connection, you may be experiencing this issue. So, try disabling Air Link to fix the problem. This is how you do it:

1. First, go to Quest 2 settings and navigate to Experimental.
2. Now disable the Air Link option.
3. Next, try connecting the Oculus Quest 2 to your PC and check if the issue is resolved or not.

8] Disable USB power saving settings

You can also try disabling USB power saving settings to fix the problem. This is how you do it:

1. First, press Win+R to open the Run dialog and type itdevmgmt.mscinside.
2. Now in Device Manager, expand theuniversal serial bus controllerCategory and right click on yoursusb input device.
3. Then select from the context menuCharacteristicsPossibility.
4. After that go to thepower managementtab and clear its checkboxAllow the computer to turn off this device to save powerPossibility.
5. Lastly, try connecting your Quest device to your PC again and check if the issue is resolved now.

9] Factory reset your Quest device

The last resort to fix the problem is to factory reset your Quest device. If the issue in question is caused by an issue within the search, this should fix the problem. Keep in mind, however, that this will erase your game data, so you'll need to download your games afterwards.

Here are the steps to factory reset your Quest 2:

1. First, hold down the power and volume down buttons until the device turns on.
2. Now mark theFactory resetoption and then tap the power button to select it.
3. Then select theYes, wipe and factory resetoption and press the power button to start the reboot process.

Hopefully, you can now connect the Oculus Quest device to your PC.

Now read:

• Oculus has detected a problem with the graphics drivers.
• Fix Oculus Rift bugs and issues.